Boundary-First Monolith to Microservices Migration Services

Split the monolith along business boundaries, not technical layers.

Most healthcare software that earns revenue today began as one application. It still works, but every release carries the whole product, every busy day scales the whole system, and the team has started asking whether it should become microservices. The question is fair. The usual answer, a ground up rewrite, is where programs lose a year and then lose leadership patience.

The risk is not the target architecture. It is drawing the boundaries in the wrong place, ending up with services that still share one database and still release together, and splitting data that clinical and billing workflows depend on. Cabot maps the system first, tests whether a split helps at all, and then extracts one service at a time behind the running application.

Most engagements open with an assessment that produces a dependency map, a boundary proposal, a data split plan and a recommendation, which may be to extract services, to make the monolith modular or to leave it alone. You decide before any extraction is funded.

Scope your project

Tell us what you run and when it has to move. An engineer replies within one business day, with no obligation.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

No obligation. Your details stay private.

What moving from a monolith to microservices actually involves

Monolith to microservices migration is the incremental move from one deployable application to a set of independently deployable services, each built around a business capability and owning its own data, while the existing system keeps running until each service has taken over its traffic.

People searching for how to convert monolithic to microservices often expect one technique, but three different projects share the phrase. The first is refactoring a monolith into clear internal modules without changing how it deploys, usually called a modular monolith. The second is extracting services one at a time behind the running application, known as the strangler fig pattern. The third is a ground up rebuild, which is the riskiest and the one we advise against most often.

The failure to design against is the distributed monolith: services that call each other constantly, share one database and must release together. It carries the operating cost of microservices and none of the independence, and it is what a split along technical layers, or one that leaves the data untouched, tends to produce.

A migration also does not mean every monolith should end as microservices. A well structured monolith that one team can release on one cadence is often the right answer, and a modular monolith is a legitimate place to stop. The assessment exists to tell you which situation you are in.

Why splitting a monolith goes wrong in predictable ways

These are the six reasons engineering leaders give when an earlier attempt stalled or disappointed. Most are not coding problems, and most stay hidden until the budget is committed.

Two engineers discussing a system diagram together at a whiteboard

The monolith to microservices migration services we deliver

Six services, scoped to where you are. Some organizations need the full path from assessment to retirement of the old code. Others already know their boundaries and need the data split, or have the services and need the platform underneath them. We give you our recommendation and our reasoning before you commit to anything.

Each service produces something you can inspect: a dependency map, a boundary proposal, a modular codebase, a running service with its own data, a working pipeline. Testing and security run inside every service instead of sitting as separate lines.

What does moving from a monolith to microservices cost, and what moves the number?

Five things set the cost: the size and condition of the codebase, how tangled the data is, how many capabilities you extract, how much platform and observability work the team still needs, and how long you want the old and new paths to run side by side. A modest monolith with clean module lines and a sprawling one with a shared database are not comparable work, so any figure quoted before an assessment is a guess. Model a range in a few minutes, then tell us what you run and we will scope it properly. We would rather give you a narrow range you can plan around than a wide one that protects us.

Should you migrate at all? Four tests before you commit

Most disappointing migrations were decided wrongly in the first week, when nobody asked whether a split would help. These four tests come first, in a fixed order, and the honest answer is sometimes to stay as you are.

Test your own case: send us a short description of your system and we will tell you which of these four decides it for you.

What does AI actually change about splitting a monolith?

It changes the economics of the slow parts and leaves the judgment where it was. Reading a codebase nobody has fully read in years, mapping which modules call which, finding the tables more than one module writes to and drafting a first set of API contracts are all work a model can draft quickly. Deciding where a business capability really ends, which consistency rules the business accepts and whether a split goes ahead is not.

In practice the saving concentrates in three places. Discovery goes faster, because a model can summarize call graphs and change history and propose candidate boundaries. Extraction goes faster, because the first draft of an interface and its tests no longer starts from a blank page. Data work goes faster, because shared tables and hidden dependencies surface early.

The risk runs the other way. A boundary that looks tidy on a diagram and cuts through a workflow the business depends on is worse than an obviously wrong one, so every proposed boundary is checked against change history and real traffic before it counts.

So our process is built around review. AI shortens the slow parts of a migration. It does not choose a boundary, approve a merge or sign off a cutover. Those stay with senior engineers and with you.

Three commitments hold on every engagement. Our process is model neutral, so we use the model your policy allows. A senior engineer reviews every change before it merges. And we never train any model on your code or data. Test data is synthetic or masked, so protected health information stays out of model prompts.

What we build services on, and what we build them with

Three layers of tooling, chosen against your constraints and your team's ability to run the result rather than against our preferences. Hosting follows your environment, whether that is the platform you run today or one our cloud consulting services and AWS cloud consulting services teams help you choose. We are platform neutral and recommend on evidence from the assessment. Our QA and testing practice builds the regression and contract tests that let services change without breaking each other.

What we work in:

Service platform

Kubernetes
Docker
Amazon EKS
Azure Kubernetes Service
Google Kubernetes Engine
Helm

Messaging and data

Apache Kafka
RabbitMQ
PostgreSQL
Debezium
Redis
OpenAPI

Observability and delivery

OpenTelemetry
Prometheus
Grafana
GitHub Actions
Argo CD
GitHub Copilot

Where AI sits at each stage of the work, and where it does not

Each stage below has an output you can inspect and a person who approves it. Nothing an AI drafts reaches your codebase, your pipelines or your data without a named engineer accepting it first.

Migration stage What AI does What stays human Tools used
Discovery Summarizes call graphs and change history, and proposes candidate service boundaries Deciding where each business capability really ends and which move first GitHub Copilot, SonarQube
Contracts and tests Drafts API contracts and characterization tests that pin down how the monolith behaves today Reviewing what the tests must protect and approving each contract OpenAPI, Pact, GitHub Copilot
Data decomposition Flags tables written by more than one module and drafts migration and sync scripts Agreeing consistency rules with the business and approving every data move Debezium, GitHub Copilot
Validation Compares responses from the monolith and the new service and summarizes differences Accepting or rejecting each difference and releasing each service OpenTelemetry, GitHub Actions

The last column names the tools, so a security reviewer can see exactly what touched the code. Where your policy limits which tools can be used, the same stages run with the tools you allow and the same human review.

How a Cabot migration differs from a typical microservices vendor's

Migrations succeed or fail on where boundaries are drawn, what happens to the data and how each cutover is reversed. Those are the places projects go wrong, so each row below is a moment where the approach changes the outcome.

Dimension Typical vendor Cabot
Starting point Begins splitting into services Begins by testing whether a split helps at all
Boundary method By technical layer or by the org chart By business capability, checked against change history and shared data
Data Services keep reading the original database Each service owns its data, with the split planned before extraction
Cutover A big switch or a long freeze One service at a time behind a routing layer, with the monolith still live
Rollback A plan on paper Traffic can return to the monolith for every extracted service until it has run clean
When they advise against it Rarely In writing, when a modular monolith serves you better
AI use Undisclosed or unreviewed Named tools, human review before merge, no training on your data

Ask any vendor when they would advise against splitting. A credible answer comes quickly and names the conditions. Ours is written into each assessment.

The organizations we migrate software for

We deliver this work for three kinds of organization. Each card says what we understand about it, rather than claiming coverage of it.

Across all three the pattern is the same: the system is important enough that a failed cutover is not an option, and old enough that few people hold the whole picture. Where services expose clinical data through APIs, our healthcare integration services practice carries the same discipline into those connections.

Industries we already understand

volunteer_activism

Healthcare

shopping_cart

Ecommerce

paid

Fintech

apartment

Travel and Tourism

Client Success Stories

See all Cabot case studies

What a migrated service has to demonstrate before it goes live

Security leads every migration, and more services mean more boundaries to defend. We apply service to service authentication, least privilege access, encryption in transit and at rest, an audit trail across services and secrets held outside the code, and we keep protected health information out of test data and model prompts.

Where services handle patient data, we map which service holds what, scope the work to the safeguards your compliance team requires through our healthcare compliance services practice, and document each control the migration touches. For each service you receive evidence, not assurance: the contract tests, the comparison report from the parallel run, the list of changes with the engineer who approved each one and the rollback plan.

Service to service authentication
Least privilege access
Encryption in transit and at rest
Audit logging across services
Secrets management
Synthetic and masked test data
HIPAA aligned controls
SOC 2 aligned controls
FHIR and HL7 aligned APIs

How a monolith becomes services, step by step

Six steps, each ending in a decision you make rather than a document you receive. Most engagements begin with the first two steps alone, so you can judge the plan and the working relationship before committing to the build.

Start with step 01: tell us what your monolith does and we will scope the first assessment.

Who migrates it, and what each person owns

Accountability is explicit from the first day. A solution architect owns the boundary decisions and the extraction order, and answers for choices that are expensive to reverse. Senior backend engineers own each extracted service. A data engineer owns the split of shared data and its consistency rules. A QA automation engineer owns the contract tests and the comparison between old and new paths. A DevOps engineer owns pipelines, observability and rollback. A delivery lead owns the schedule and tells you plainly when something slips.

Our depth is greatest in four places: finding service boundaries in codebases that have no clean modules, splitting shared databases without losing data integrity, running old and new paths side by side to prove they match, and building the pipelines and tracing that make many services operable.

A typical week has a fixed shape: planning at the start, a demonstration of working services midweek, and a written status at the end covering what moved, what is blocked and what decision we need from you.

Your engineers join our standups and reviews from week one, so the knowledge stays with you. Where a larger group fits, we staff an embedded engineering pod inside your delivery cadence.

Why healthcare technology leaders choose Cabot for boundary-first monolith to microservices migration

A migration is easy to start and hard to finish well. These are the six reasons buyers give when they explain why the work sits with us.

Where to go next, depending on what is in your way

The split is one part of the picture. What you need alongside it depends on which of these describes your situation, and it is usually one of three.

Our Clients

Questions engineering and technology leaders ask before starting

  1. How do you convert a monolith to microservices?
    Convert it incrementally rather than rewriting it. Map the code, data and dependencies, draw service boundaries around business capabilities, make the monolith modular where boundaries are unclear, then extract one service at a time behind a routing layer so traffic moves gradually and can return to the monolith. Each service takes ownership of its data, and the old code is retired only once the service has run clean. This is the strangler fig pattern, and it keeps the system live throughout.
  2. Should we migrate to microservices or keep a monolith?
    Keep the monolith if one team can release it on one cadence and no module needs to scale or change on its own. Migrate when different parts of the system need different release speeds or scaling, when a regulated or high load component should be isolated, or when team size makes a single codebase a bottleneck. A modular monolith is a legitimate middle position, and many teams stop there. Our assessment tests these conditions and puts the recommendation in writing.
  3. How long does it take to move from a monolith to microservices?
    It depends on the size and condition of the codebase, how tangled the data is, how many capabilities you extract and how much platform work is needed. A first extraction of a well bounded capability can be done in weeks. A full decomposition runs in stages over many months, and some systems never need one. We give you a range after the assessment, so you see a timeline before you commit.
  4. How much does a monolith to microservices migration cost?
    Cost follows the same drivers as the timeline: codebase size and condition, data complexity, the number of services you extract, the platform and observability work required and how long the old and new paths run side by side. We give a range after the assessment, so you see numbers before you commit. For a first view, use the cost calculator.
  5. What is a distributed monolith and how do we avoid one?
    A distributed monolith is a set of services that still share one database, call each other constantly and must release together. It has the operating cost of microservices and none of the independence. We avoid it by drawing boundaries around business capabilities rather than technical layers, giving each service its own data and testing that a service can be released without releasing its neighbors.
  6. Can we migrate without downtime?
    In most cases, yes. The monolith keeps serving production while each new service is built, tested and compared beside it. A routing layer moves traffic gradually, and rollback stays ready for every service. Where a short maintenance window cannot be avoided, usually for a final data cutover, we plan it with you for your lowest volume period.
  7. How do you split a shared database?
    We identify which module owns each table, replace cross module joins with calls or events, and keep the old and new data in step while both paths run, using change data capture where it fits. Writes move to the service once the comparison is clean, and the monolith's access is removed last. Where a transaction spans what will become two services, we agree the consistency rules with the business first, because some operations must become eventually consistent.
  8. Do microservices make HIPAA compliance harder?
    Not by themselves, but they change the work. More services mean more network boundaries to secure, more places protected health information can travel and an audit trail that must follow a request across services. They can also help, because patient data can be isolated in fewer services with tighter access. We map which service holds what and scope the controls to it, and your compliance team decides what counts as compliant. Our healthcare compliance services practice supports that review.