Continuity-First Legacy System Migration Services

Leave the old system without switching the business off.

The system still runs the business. It books the appointments, adjudicates the claims, holds the results or posts the charges, and it has done so for years. But the vendor has stopped issuing security fixes, the engineers who built it are retiring, and every change takes longer and costs more than the last one.

The hard part of legacy system migration is not the target platform. It is the cutover. Most failed programs did not pick the wrong technology. They tried to switch everything at once, found rules nobody had written down, and either stalled or went live before the new system had proved it could do what the old one does.

Cabot works the other way round. We scope the system before you commit, write tests that pin down how it behaves today, and then move it in staged releases with the old system still live and a rollback at every stage. Your people keep working while the new platform earns its place.

Tell us about the system you need to move

Describe what the system does, how old it is and what stops if it goes down. A Cabot architect will reply with the questions that decide how to scope the assessment.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

No obligation. Your details stay private.

What legacy system migration actually involves

Legacy system migration is the move of an aging business system, its data and its integrations to a supported platform, done in stages so the business keeps running on the old system until the new one has proved it behaves the same way.

That separates it from three things it is often confused with. Modernization improves or redesigns a system and may or may not change where it runs. A rewrite discards the system and rebuilds it from a blank page, which means rediscovering every rule the old one quietly enforced. A lift and shift moves the same code to new servers and fixes nothing. Migration keeps what the system does, changes what it runs on, and treats proof that the new system matches the old as the deliverable.

Inside a migration there are five strategies, and one program usually mixes them. Rehost moves the system as it is. Replatform changes the platform underneath with little code change. Refactor restructures the code. Rebuild recreates the system on a new design. Replace retires it for packaged software. Choosing between them component by component, instead of once for the whole portfolio, is most of the work in legacy application migration. Whether the brief reads as legacy software migration or as moving one application, the method is the same.

A migration also does not always mean leaving. A stable, low risk system with a clear owner can stay where it is, and the assessment is built to tell you that in writing when it is true.

Why legacy system migrations stall before they deliver

These are the six reasons technology and operations leaders give when an earlier attempt slowed down or stopped. Most are decided in the first weeks, long before anyone writes code.

Two colleagues collaborating at office computers while reviewing a system together

The legacy system migration services we deliver

Our legacy application migration services come in three forms, scoped to where you are. Some organizations need the full path from assessment to retiring the old system. Others need only the data moved, or only a supported runtime under an application that otherwise works. We give you our recommendation and our reasoning before you commit to anything.

Each service produces something you can inspect: a scoped plan, a test suite that pins current behavior, a staged release, a reconciliation report. Testing and security run inside every service instead of sitting as separate lines.

What does legacy system migration cost, and what moves the number?

Five things set the cost: how large and how old the system is, how much of its behavior is documented or covered by tests, the volume and quality of the data, the number and age of the integrations, and how long the old and new systems have to run side by side. Two systems that look alike on paper can differ many times over, so any figure for legacy system migration services quoted before an assessment is a guess. Model a range in a few minutes, then tell us what you run and we will scope it properly. We would rather give you a narrow range you can plan around than a wide one that protects us.

What does a legacy migration assessment tell you before you commit?

A short assessment answers the questions that sink most programs before any code changes. It runs in four parts, in this order, and it can end in a recommendation to leave the system alone.

Scope your own system: send us a short description of what you run and we will tell you what the assessment would cover.

What does AI actually change in a legacy migration?

It changes how fast the slow parts go and leaves the judgment where it was. Reading code that nobody documented, drafting a plain language list of the rules it enforces, mapping which modules call which and finding dead code are all work a model can draft quickly. Deciding which rules the business still needs, which were workarounds for limits that no longer exist and whether a feature should survive at all is not.

The saving concentrates in three places. Discovery goes faster, because a model can summarize an unfamiliar codebase into rules and dependencies for an engineer to check. Test writing goes faster, because characterization tests that record current behavior can be drafted from the code and then run against real data. Repetitive refactoring goes faster, because a model can propose the same change across hundreds of files for review.

The risk runs the other way. A model can describe a rule with confidence that the code does not actually implement, and it can miss behavior hidden in a configuration file or a database trigger. So every recovered rule is confirmed against real outputs and against the people who use the system before it counts.

AI shortens the slow parts of a migration. It does not decide which rules survive, approve a merge or sign off a cutover. Those stay with senior engineers and with you, and where you need help choosing a model your policy allows, our AI development team is part of the conversation.

Three commitments hold on every engagement. Our process is model neutral, so we use the model your policy allows. A senior engineer reviews every change before it merges. And we never train any model on your code or data. Test data is synthetic or masked, so protected health information stays out of model prompts.

What we move your system onto, and the tools we use to move it

Three layers of tooling, chosen against your environment and your team's ability to run the result rather than against our preferences. The target follows what you run today and what your security team will accept, and we recommend on evidence from the assessment. Our QA and testing practice builds the test suites that compare the new system with the old before anyone relies on it.

What we work in:

Target platforms

.NET
Java
Node.js
Python
React
TypeScript

Data and hosting

SQL Server
PostgreSQL
Azure
AWS
Docker
Kubernetes

Delivery and AI tooling

GitHub Actions
SonarQube
Playwright
GitHub Copilot
Azure DevOps
OpenAPI

Where AI sits at each stage of a legacy migration, and where it does not

Each stage below has an output you can inspect and a person who approves it. Nothing an AI drafts reaches your data, your code or your production system without a named engineer accepting it first.

Migration stage What AI does What stays human Tools used
Assessment Reads code and configuration and drafts a plain language list of the rules and dependencies they contain Confirming which rules the business still needs and which were workarounds GitHub Copilot, SonarQube
Safety net Drafts characterization tests that record what the system does today Choosing which behaviors must never change and approving the tests GitHub Copilot, Playwright
Migration Proposes repetitive code changes and drafts data migration scripts for review Approving every merge and every data move GitHub Copilot, GitHub Actions
Cutover Compares outputs from the old and new systems and summarizes the differences Accepting or rejecting each difference and approving each cutover Playwright, Azure DevOps

The last column names the tools, so a security reviewer can see exactly what touched the work. Where your policy limits which tools can be used, the same stages run with the tools you allow and the same human review.

How a Cabot legacy migration differs from a typical vendor's

Legacy migrations succeed or fail on scoping, testing and cutover, not on the choice of target platform. Those are the places projects go wrong, so each row below is a moment where the approach changes the outcome.

Dimension Typical vendor Cabot
Scoping A quote after a short call A written assessment before you commit
Approach Rewrite from a blank page Staged migration with the old system still live
Testing Tests written after the build Characterization tests that pin current behavior first
Downtime A planned outage at cutover One workflow at a time, with the old system running beside the new
Rollback Restore from a backup A rollback plan at every stage, rehearsed before it is needed
Security review At the end In the first stage, with findings fixed as they appear
AI use Undisclosed or unreviewed Named tools, human review before merge, no training on your data
Knowledge transfer A handover document at the end Your engineers in standups and reviews from week one

Ask any vendor when they would advise against migrating. A credible answer comes quickly and names the conditions. Ours is written into each assessment.

The healthcare organizations we migrate legacy systems for

We deliver legacy system migration services for three kinds of healthcare organization. Each card says what we understand about that environment, rather than claiming coverage of it.

Across all three the pattern is the same: the system is important enough that a failed cutover is not an option, and old enough that few people hold the whole picture. Where the new platform needs a rebuilt application around it, our healthcare application development practice carries the same discipline into the build.

Industries we already understand

volunteer_activism

Healthcare

shopping_cart

Ecommerce

paid

Fintech

apartment

Travel and Tourism

Client Success Stories

See all Cabot case studies

What a migrated system has to prove before it goes live

Security leads every legacy migration, because the move is your chance to close what the old system never covered. We scan dependencies and fix known vulnerable ones first, apply authentication and role based access, encrypt data in transit and at rest, log every change to an audit trail and hold secrets outside the code. Protected health information stays out of test data and model prompts.

Where the system handles patient data, we map who can see what, scope the work to the safeguards your compliance team requires through our HIPAA compliance consulting practice, and document each control the migration touches. For each stage you receive evidence, not assurance: the test results, the reconciliation report, the list of changes with the engineer who approved each one and the plan for returning to the old system.

Dependency and vulnerability scanning
Role based access
Authentication and session control
Encryption in transit and at rest
Audit logging of every change
Secrets management
Synthetic and masked test data
HIPAA aligned controls
SOC 2 aligned controls

How does a legacy system move without the business stopping?

Three stages, each ending in a decision you make rather than a document you receive. Most engagements begin with the assessment alone, so you can judge the plan and the working relationship before committing to the migration.

Start with step 01: tell us what the system does and we will scope the assessment.

Who owns each part of a legacy migration at Cabot

Accountability is explicit from the first day. A solution architect owns the target design and the order of migration, and answers for choices that are expensive to reverse. A business analyst owns the recovered rules and confirms them with the people who use the system. A data engineer owns the data move and the reconciliation that proves it. Senior engineers own the application changes and the merge reviews. A QA automation engineer owns the characterization tests and the comparison between old and new. A delivery lead owns the schedule and tells you plainly when something slips.

Our depth is greatest in four places: reading code nobody documented, writing tests that pin down behavior before anything changes, moving regulated data without losing integrity, and running old and new side by side until the numbers match.

Your people join our standups and reviews from week one, so the knowledge stays with you instead of leaving with us. Where a larger group fits, we staff an embedded engineering pod inside your delivery cadence.

Why healthcare technology leaders choose Cabot for continuity-first legacy system migration services

A legacy migration is easy to start and hard to finish well. These are the six reasons buyers give when they explain why the work sits with us.

Where to go next, depending on what you run

Legacy system migration is the front door to a group of more specific migrations. Which one you need next depends on the system you run, and it is usually one of three.

Our Clients

Questions technology and operations leaders ask before starting

  1. What is legacy system migration?
    Legacy system migration is the move of an aging business system, its data and its integrations to a supported platform, in staged releases so the business keeps running throughout. It keeps what the system does and changes what it runs on, which separates it from a rewrite that starts again and from a lift and shift that moves the code without fixing it. Cabot treats proof that the new system behaves like the old one as the deliverable.
  2. Should we migrate or rewrite a legacy system?
    Migrate when the system still does what the business needs and the problem is the platform, the support or the cost of change. Rewrite only when the design itself is the problem, and even then do it in stages with the old system live. A rewrite from a blank page discards the rules the old system quietly enforces, which is why so many stall. The assessment tells you which case you are in, and it can recommend leaving the system alone.
  3. How long does a legacy system migration take?
    It depends on the size and age of the system, how much of its behavior is documented or tested, the data volume and the number of integrations. The assessment comes first and gives you a range for the rest, so you see a timeline before you commit. The migration itself runs in staged releases, usually over months, with the old system working throughout.
  4. How much does legacy system migration cost?
    Cost follows five drivers: the size and age of the system, documentation and test coverage, data volume and quality, the number of integrations, and how long old and new run side by side. We give a range after the assessment, so you see numbers before you commit. For a first view, use the cost calculator.
  5. Can we migrate a legacy system without downtime?
    In most cases downtime can be reduced to a short window, and sometimes avoided entirely. The old system keeps serving production while each workflow is migrated, tested and compared beside it, and a workflow moves only after it has run clean. The one step that can need a short freeze is the final data cutover, which we plan with you for your quietest period.
  6. How do you migrate legacy data safely?
    We profile the data first, fix what is wrong in the source, migrate in rehearsed runs and reconcile record counts and totals against the old system at every step. Protected health information stays out of test environments through synthetic or masked data, and every run has a rollback. Nothing is retired until the numbers match.
  7. Which migration strategy fits: rehost, replatform, refactor, rebuild or replace?
    It depends on the component, not the whole system. Rehost moves it as it is and fixes nothing. Replatform changes the platform underneath with little code change. Refactor restructures the code, rebuild recreates the system on a new design, and replace retires it for packaged software. Most programs mix them, and the assessment chooses per component, which is why a single strategy picked up front is usually wrong.
  8. What happens if we keep the legacy system?
    Support gaps, security exposure and the cost of every change keep growing, and the people who understand the system keep leaving. For a stable, low risk system that is an acceptable choice, and we will say so. For a system that handles regulated data or sits on an unsupported platform, the risk is carried every month the decision waits.